The sculpture logo shows the cultural heritage of a city, and the surface treatment has mirror polishing treatment, as well as surface treatment effects such as spray painting, gold plating, and titanium plating.
It is generally welded, which is relatively firm, that is, the skeleton of the sculpture itself is welded with the embedded iron on the base, and the steel bar is welded under the embedded iron. The length of the steel bar and the size of the embedded iron are determined according to the size of the sculpture. For the sake of beauty, usually, after the sculpture is installed, the base will be pasted with marble or granite slabs.
Stainless steel sculpture has a variety of shapes, geometric sculpture, round sculpture, abstract, etc., rich in content and strong plasticity.
Stainless steel sculptures should be cleaned regularly and placed in a dry environment for protection. It is best to wear gloves when holding it by hand to prevent salt corrosion in the sweat on your hands. If the dirt on the stainless steel sculpture is too heavy, blow it with a cold wind hair dryer first. Then clean with a straw brush and finish with a soft bristle brush. Never use metal polish, water, or any other solvents. That will discolor the copper. For the stainless steel sculpture gap, we can wet the cotton ball with saliva and wipe it, and wipe it from the beginning to the end along the crack, so as not to miss it. Once a year, a thin layer of microcrystalline wax, the kind of colorless wax, is applied to the copperware.